# Mixing

Balance the song in the mixer: levels and pans, where each track's sound goes, shared effects on returns, buses for groups, separate headphone mixes, and an EQ on every channel.

Press **Tab** (or **Mix** in the transport) to open the mixer, and Tab again to go back to the song.

![The mixer for the Night Drive demo: a strip per track, the returns, and the master on the right.](https://getlathe.app/img/docs/docs-mixer.jpg)

## A channel strip

Each track's strip has:

- Its **input** and, for a track you record, **monitoring**: **Auto** (hear the input while armed), **In** (always) or **Off** (never; use your interface's direct monitoring). A MIDI track also has **MIDI to**, for a hardware synth.
- Its **plug-ins**, and **+** to add one.
- The **EQ curve**. Click it to open the [channel EQ](#the-channel-eq) in the device panel.
- One **send** knob for each return.
- **Pan**, the **fader** and a level meter, with arm, solo and mute.
- The **output**: where its sound goes.

The returns, group buses and the master come after the tracks.

## Routing

- **Inputs:** any mono input of your interface (**In 1**, **In 2**, ...), any stereo pair, or another track (see [Recording](https://getlathe.app/docs/recording.md#record-one-track-into-another)).
- **Outputs:** each track goes to the **Master**, to a return, or straight to an output of your interface, for re-amping or outboard gear. The master goes to whichever output pair you choose (1/2 by default).
- **Plug-in delay compensation** is automatic, exports included: a plug-in that delays its sound doesn't put its track out of time.

## Sends and returns

A return is a channel for a shared effect, like one reverb several tracks send to. Add one with **+ Return** in the mixer, Cmd/Ctrl+Alt+T, or right-click empty space in the arrangement.

Every audio and MIDI track has one send knob per return (A, B, ...), after the fader by default. Turn it up to send some of the track to that return. Put Reverb or Delay on a return and it starts at Mix 100%, since the track's dry sound is already in the mix.

## Group buses

A [track group](https://getlathe.app/docs/arranging.md#track-groups) can have its own bus: a channel every track in the group plays through, like a drum bus. Click **FX** on the group's header (or right-click it > **Add Plug-ins to the Whole Group**).

- The bus opens in the device panel, so you can add plug-ins (a compressor, a reverb), the channel EQ and a fader that process the whole group at once.
- Tracks that join the group later play through it too; tracks that leave go back to the master.
- The bus shows in the mixer with the returns.
- Right-click the group header > **Remove Group Bus** to send the tracks straight to the master again.

Without a bus, a group only controls its tracks together. With one, their sound is mixed and processed together too. In the mixer, members show the group's name above their own.

## Monitor mixes

A monitor mix is a second mix of the same channels, on its own pair of outputs: an in-ear or headphone feed for the players. You could have the hi-hats on the left in your in-ears while they sit on the right in the main mix.

1. In the mixer, click **+ Monitor mix**. It starts as a copy of the main mix and goes to the first free output pair (3/4 on most interfaces, where your in-ear or headphone amp plugs in).
2. Switch between **Main** and your monitor mixes with the tabs above the strips.
3. In a monitor mix, the faders, pans and mute buttons set that mix's own levels. The faders and the strip edges turn the mix's colour, so you know which mix you're editing. The master strip becomes the mix's volume, output pair and mute. The main mix doesn't change.

What a monitor mix hears:

- Each channel after its plug-ins and EQ, and before its main fader. The main fader, pan, mute and solo don't affect it.
- Returns at their own level in the mix, fed by the main sends. Tracks routed into a return are heard through that return.
- **Click:** each monitor mix has its own metronome level. Turn off **Click in main** to hear the click only in your monitor mixes.

Right-click a mix's tab to rename it, copy the main mix's levels into it again, or delete it. Monitor mixes are saved with projects and templates, so a tracking template can carry your in-ear mix. They're for listening only and aren't exported.

## The channel EQ

Every track, return, group bus and the master has a built-in EQ with six bands: a low cut (24 dB/oct), a low shelf, two bells, a high shelf and a high cut.

![The channel EQ on the bass, in the device panel: a low cut, a dip at 250 Hz and a small lift at 900 Hz.](https://getlathe.app/img/docs/docs-eq.jpg)

- Each mixer strip shows the EQ's curve. Click it to open the EQ in the device panel.
- **Drag** a numbered point to set its frequency and gain.
- **Scroll** (or Alt-drag) on a bell to set its width.
- **Double-click** a bell or shelf to set it back to 0 dB, or double-click a cut to turn it on or off.
- The power button bypasses the whole EQ. **Reset** flattens it.
- A flat EQ uses no CPU: Lathe skips any band at 0 dB and any cut that's off.

### Where the EQ sits

The EQ starts after the plug-ins, and you can move it in among them. Drag the EQ card by its name to another place in the chain (a line shows where it will land; Escape leaves it where it was), or use its **<** and **>** buttons. Moving it is one undo step and is saved with the song.

- On the master, move the EQ before Mastering (or any limiter) for tone changes on the whole mix. After the limiter, a boost can go past its ceiling.
- On a MIDI track, the EQ can't go before the instrument: there's no sound there yet.
- Adding or removing a plug-in leaves the EQ between the same neighbours. If it's last, it stays last as plug-ins are added.

## Hearing what a change did

Before you keep a mix change, compare it with how it was: see [Compare](https://getlathe.app/docs/compare-and-undo.md#compare). The [AI assistant](https://getlathe.app/docs/ai-assistant.md) can also listen to the mix and tell you what's clipping, what's fighting the bass, and how loud it is.
